Okay right now the only computer I have in my home is a laptop. I would like to hook up a wireless connection and have bought a linksys router. Is it possible to have wireless with just one computer or do I need to have another computer to set up the network?
Announcement
Collapse
No announcement yet.
Wireless Help
Collapse
This topic is closed.
X
X
-
Also its advisable to set up some sort of wireless security so you can control who has access to your wireless connection.
http://linksys.custhelp.com/cgi-bin/...i=&p_topview=1
This link shows you how to set up a simple passphrase for a linksys router.
Also a good idea to change the default password used to access your router:
http://linksys.custhelp.com/cgi-bin/...i=&p_topview=1
again a link that shows how to change it on a linksys router.Last edited by Chanlin; 01-25-2009, 12:46 AM.
Comment
-
Quoth Broomjockey View PostNope. You only need a wireless router, and a computer with wireless abilities. It can be a little hard to set up at first though, so I'd recommend using a cable for that part.
Comment
-
Quoth mattm04 View PostFrom experience it is much easier to use a wired connection from the laptop to the router for the intial setup and passwords,
Comment
-
Quoth mattm04 View PostFrom experience it is much easier to use a wired connection from the laptop to the router for the intial setup and passwords, etc.I AM the evil bastard!
A+ Certified IT Technician
Comment
-
Quoth lordlundar View PostSafer too. Think about it. Until the encryption is setup, you are broadcasting the info out there. land line setup doesn't have that liability.
Comment
-
Quoth Pedersen View PostI've known that governments used TEMPEST shielding, but never knew that this had been integrated into the Ethernet standards. Cool. You learn something new every day
Just to clarify, Ethernet cables do not have TEMPEST grade shielding, but do have some shielding to block external EM signals from causing interference, same as most cables. The shielding, because of it's nature, works both ways and reduces the signal's EM field as well, to the point where you need to physically tap the cable for something you can interpret.
Now which seems safer, Broadcasting the info 30+ meters where someone wardriving can pretty much bypass all the security implemented, or using a cable which will broadcast an interpretable signal for maybe a quarter inch around it?I AM the evil bastard!
A+ Certified IT Technician
Comment
-
Quoth lordlundar View PostBad Pedersen, BAD! <whack whack whack!>
Okay, granted, parties seem to migrate away from me, but that doesn't mean I'm not fun, right? *sniffle*
Quoth lordlundar View PostJust to clarify, Ethernet cables do not have TEMPEST grade shielding, but do have some shielding to block external EM signals from causing interference, same as most cables. The shielding, because of it's nature, works both ways and reduces the signal's EM field as well, to the point where you need to physically tap the cable for something you can interpret.
Quoth lordlundar View PostNow which seems safer, Broadcasting the info 30+ meters where someone wardriving can pretty much bypass all the security implemented, or using a cable which will broadcast an interpretable signal for maybe a quarter inch around it?
Comment
-
Quoth Pedersen View PostWell, to be pedantic, ethernet is called Unshielded Twisted Pair for a reason. It's possible I've misunderstood (I freely admit we're getting into areas that are not my strength), but what I did understand was that these cables do broadcast. Not nearly as far, and not nearly as easy to read, but they do broadcast.
UTP is kind of a misnomer, because even UTP has some layers of shielding, from the individual wire coating, to the outer shell, and some use a type of fiberglass for filler. Even though it's all there for electrical insulation, It also does some EM field protection. Very little, but there's not a lot of electricity running through them anyway so there is a difference in the EM field. Still, it's a lot harder to tap into a wired signal than a wireless.I AM the evil bastard!
A+ Certified IT Technician
Comment
-
Made sure it was all nice and secure. I think I may have to have someone come out and set it up for me. I connected through the ethernet to set up and configure the router, and as soon as it unplug the ether net it doesn't work. Hopefully I can find someone who can just come here and fix it lol.
Comment
Comment