Announcement

Collapse
No announcement yet.

Dial 4 for, wait that number isn't in service.

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Geek King
    replied
    Quoth Chromatix View Post
    And then he pointed out that the engineers responsible for the design knew this, and had communicated it up the chain of command, and written it into the operating manuals - but that all this advice had been ignored by upper management who made the decisions on whether to launch or not.
    Yup. And there's the real tragedy. The flaws were well known, documented, and completely ignored by people who were too antsy to wait a couple more days for the temperatures to rise. Those astronauts in the shuttle were killed by impatience.

    Leave a comment:


  • Merriweather
    replied
    Quoth dalesys View Post
    And made in Utah by a company owned by polygamists. (A few years after Challenger I installed a card access system there.)
    That sounds like a conspiracy theory in the making

    (Just joking, honest)

    Leave a comment:


  • Chromatix
    replied
    There's a pretty thorough write-up of the Challenger disaster in one of Richard Feynman's autobiographies - since he was on the investigation committee. Worth reading, as it's still a classic example of management failure.

    "Nature cannot be fooled."

    At one point he demonstrated the O-ring problem by borrowing one of the O-rings from a *model* of the Shuttle, which happened to be made of the same material, clamping it in a miniature vice, and immersing it in his glass of ice water at the conference table. Later he took it out of the glass, unscrewed the vice, showed everyone that the rubber had not rebounded to it's original shape, and reminded them that ice water was always very close to freezing point, similar to the temperature on the launchpad. So when the joint flexed under the increased pressure due to the engines being turned on, the ring no longer sealed it.

    And then he pointed out that the engineers responsible for the design knew this, and had communicated it up the chain of command, and written it into the operating manuals - but that all this advice had been ignored by upper management who made the decisions on whether to launch or not.
    Last edited by Chromatix; 06-24-2012, 07:56 PM.

    Leave a comment:


  • HYHYBT
    replied
    I sure hope that wasn't your last tube...

    (This is more or less why I started keeping all that stuff in the car. Though the actual incident was finding out, as I was using it to scrub out the mix reservoirs, that people had been using the big brush for cleaning toilets. Yes, it *looks* like a toilet brush, but yuck.)
    Last edited by HYHYBT; 06-22-2012, 02:14 AM. Reason: Add gross story

    Leave a comment:


  • Victory Sabre
    replied
    Quoth HYHYBT View Post

    It *may* just be a legal thing. But it does get in the product a little bit; sometimes noticeably in the first few cones after assembly. So it has to be safe and relatively tasteless.

    Sorry for going on. I miss "my" ice cream machine.
    That is correct. It is safe to eat and tasteless. The person who used to do it demonstrated that be eating some.


    There is also a NSFW part to this as well Highlight to see.

    One morning after opening, the opener had to use the restroom, and found a tube of it in the men's bathroom. END!

    Leave a comment:


  • raudf
    replied
    Quoth Victory Sabre View Post
    Update - They called back, and I got my order placed. Much better than last time ordering from them.
    Pray you have this much trouble getting to a person the next time around, because it seems to have made the ordering end of things easier

    Leave a comment:


  • dalesys
    replied
    Quoth HYHYBT View Post
    (Though the ones the space shuttles used were, of course, neither small nor cheap)
    And made in Utah by a company owned by polygamists. (A few years after Challenger I installed a card access system there.)

    Leave a comment:


  • HYHYBT
    replied
    O-rings are small & cheap & usually designed to be fail points.
    …which is why you change them while the machine is apart anyway; you don't put the ones with nicks or flat spots back in, because then it will quit working in the middle of lunch.
    (Though the ones the space shuttles used were, of course, neither small nor cheap)

    Update - They called back, and I got my order placed. Much better than last time ordering from them.
    YAY!!!

    What make lube "food service quality"?
    It *may* just be a legal thing. But it does get in the product a little bit; sometimes noticeably in the first few cones after assembly. So it has to be safe and relatively tasteless.

    Sorry for going on. I miss "my" ice cream machine.

    Leave a comment:


  • Merriweather
    replied
    Quoth Teefies2 View Post
    I'm really gonna be dating myself, but this discussion about o-rings got me thinking. The space shuttle Challenger was destroyed because its o-rings failed in 20 degree weather. Does anyone else remember that? What is it about o-rings?
    Yep, I remember. Heck, I remember the moon landing. I'm old. Sigh.

    Leave a comment:


  • Victory Sabre
    replied
    Update - They called back, and I got my order placed. Much better than last time ordering from them.

    Leave a comment:


  • Geek King
    replied
    Quoth Teefies2 View Post
    I'm really gonna be dating myself, but this discussion about o-rings got me thinking. The space shuttle Challenger was destroyed because its o-rings failed in 20 degree weather. Does anyone else remember that? What is it about o-rings?
    O-rings are kind of a generic term for round rings meant to act as seals between metal joints holding fluids. They come in all kinds of sizes and materials.

    In the Challenger shuttle explosion, those o-rings were meant for high temperatures, but got brittle at low temperatures. It is believed that the cold weather launch caused the o-rings sealing the rocket fuel pipes to fail, leak, and allowed the fuel to catch fire where it shouldn't and finally explode.

    Leave a comment:


  • Jay 2K Winger
    replied
    Quoth Raveni View Post
    I liked it much better when we were talking about lube.

    What make lube "food service quality"?
    One word, to quoth the Hyneman: "Laaaard."

    Leave a comment:


  • Raveni
    replied
    I liked it much better when we were talking about lube.

    What make lube "food service quality"?

    Leave a comment:


  • RealUnimportant
    replied
    O-rings are small & cheap & usually designed to be fail points.

    Leave a comment:


  • Teefies2
    replied
    Quoth HYHYBT View Post
    The ice cream machine was something I tended to make sure I did myself, partly because keeping the brushes in my car was the only way to make sure they weren't used for other things or lost entirely, and partly because it was too tempting to cheat and I got sick of finding the pumps full of cheese when it was my turn. That or they'd try to use absolutely as little of the lube as possible and the thing would either be squeaking before it was due to be taken down again (heat treat machine, once every two weeks) or it would chew up its O-rings and not work. I mean yes, I understand not wanting to waste the stuff, but buying more parts and not being able to sell ice cream costs a lot more.

    I much preferred the Taylor Lube, too, though it's been so long since I've even seen another kind I don't remember why.

    Is this any use?

    I'm really gonna be dating myself, but this discussion about o-rings got me thinking. The space shuttle Challenger was destroyed because its o-rings failed in 20 degree weather. Does anyone else remember that? What is it about o-rings?

    Leave a comment:

Working...
X